Introduction Multiple programs available for different value and coin type Maximum 4 channel programmable. Can be re-programs by internal setup function. High Sensitivity / Fast accept coin inserted. Setting instruction Pre-start For the best result, turn on power for 10 minutes before programming. 15 pieces each coin type. New and Old minted mix up. Program Set up Turn “START” switch 5 to “SET” position And “SENSITIVITY” 6 to “NOR”. LED display show “00 “ Press switch 2 to select number of value for program. The number show on display 3 represent coin value. Display show “1” = 10 cents ; “2” = 20 cents ; “5” = 50 cents ; “10” = $1 Slowly insert 1 coin at a time after 15 coins been inserted. The Display show “F” with Beeb twice, and Display return to “0” the first channel program completed. To program next channel with different value, Repeat step 2 Turn “START” switch 5 back to “START” and the display show number of stored channel few second then return to “0” The coin machine ready to work Erase All Programs Turn “START / SET” switch 5 to “SET” position Press switch 2 to select coin value need to be erase Press and Hold switch 2 until “BEEP” and display show “0” Return switch 5 back to “START” Erase Single Coin Program Turn “START / SET” switch 5 to “SET” Press and hold 2 switch Return switch 5 back to “START” Wire Connection Wiring and Plug in connector to the header
